sInfluence of starch and protein molecular interactions on the in vitro digestion characteristics of biscuits partially substituted with pulse flours

Recent research has shown that pulse-derived ingredients present a technological alternative to cereals, higher protein and fibre content, and differentiated starch characteristics. In this work, the partial substitution of pulse flours with and without heat moisture treatment (HMT) was evaluated in a biscuit model. The digestion residues at 20 and 120 min that correspond to rapidly, slowly and resistant starch from the Englyst methodology were analysed by DSC, X-Ray and ATR-FTIR. The use of pulse flours in biscuits improved their thermal stability (ΔH = 3.01 and 4.99 J/g for control and Lentil + HMT), preserving a fraction of particularly ling glucans, that influenced the decreasing in the rapidly available starch from 55.26 to 24.11 % (Control and Faba bean + HMT), and enhanced its protein's digestibility from 75.26 to 87.43 % for the same sources. Among pulses, there were similarities regarding their resistance to enzymatic hydrolysis that may help select those with better organoleptic attributes.     

Synthesis,Computational Studies and Assessment of in Vitro Activity of Squalene Derivatives as Carbonic Anhydrase Inhibitors

We report novel molecules incorporating the nontoxic squalene scaffold and different carbonic anhydrase inhibitors (CAIs). Potent inhibitory action, in the low-nanomolar range, was detected against isoforms hCA II for sulfonamide derivatives, which proved to be selective against this isoform over the tumor-associate hCA IX and XII isoforms. On the other hand, coumarin derivatives showed weak potency but high selectivity against the tumor-associated isoform CA IX. These compounds are interesting candidates for preclinical evaluation in glaucoma or various tumors in which the two enzymes are involved. In addition, an in silico study of inhibitor-bound hCA II revealed extensive interactions with the hydrophobic pocket of the active site and provided molecular insights into the binding properties of these new inhibitors.     

Use of coffee by‐products for the cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus and its impact on biological properties of extracts thereof

Incorporating spent coffee grounds (SCGs), a by‐product from coffee brewing, in growth substrate of beneficial edible mushrooms is an approach that has to be further studied due to its potential positive outcomes: environmental impact mitigation, production costs reduction and beneficial impact on consumer health. Hence, cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus was tested using SCG which enabled maximum production yield of P. citrinopileatus which was of 25.1% (w/w). Variable antidiabetic potential was observed between aqueous and enzymatic extracts (3.8%–29% inhibition) regardless species and substrates, whereas aqueous extract of P. citrinopileatus grown in substrate without SCG stood out presenting the highest antioxidant activity and inhibition activity of angiotensin I‐converting enzyme (IC₅₀ = 123 μg mL^?1). Ethanolic and aqueous extracts of both Pleurotus species grown in the presence or absence of SGC proved to be an interesting prebiotic source for growth of Bifidobacterium animalis Bo in comparison with fructooligosaccharides (FOS).     

One-Step Rapid Fabrication of Cell-Only Living Fibers

Cellular aggregates are used as relevant regenerative building blocks, tissue models, and cell delivery platforms. Biomaterial-free structures are often assembled either as 2D cell sheets or spherical microaggregates, both incompatible with free-form deposition, and dependent on challenging processes for macroscale 3D upscaling. The continuous and elongated nature of fiber-shaped materials enables their deposition in unrestricted multiple directions. Cellular fiber fabrication has often required exogenously provided support proteins and/or the use of biomaterial-based sacrificial templates. Here, the rapid (<24 h) assembly of fiberoids is reported: living centimeter-long scaffold-free fibers of cells produced in the absence of exogenous materials or supplements. Adipose-derived mesenchymal stem cell fiberoids can be easily modulated into complex multidimensional geometries and show tissue-invasive properties while keeping the secretion of trophic factors. Proangiogenic properties studied on a chick chorioallantoic membrane in an ovo model are observed for heterotypic fiberoids containing endothelial cells. These micro-to-macrotissues may find application as morphogenic therapeutic and tissue-mimetic building blocks, with the ability to integrate 3D and 4D full biological materials.     

Synergistic antimicrobial effect of lactocin AL705 and nisin combined with organic acid salts against Listeria innocua 7 in broth and a hard cheese

The effectiveness of antimicrobial mixtures against Listeria innocua 7, used as a L. monocytogenes surrogate, was investigated in broth and a food system. Synergistic effects were found for nisin (Nis), potassium sorbate (PS), calcium propionate (CP) and sodium lactate (SL), Nis + PS being the most effective binary mixture that exhibited listericidal activity in broth. To assess the effect of adding lactocin AL705 (AL705) to Nis + organic acid salt combinations, tridimensional isobolograms were generated. Sub-MIC combinations of the antimicrobials exerted bactericidal activity against L. innocua 7 after AL705 addition to the binary mixtures. However, when applied on Sardo cheese contaminated with L. innocua 7 (initial inoculum 4.45 ± 0.06 CFU g⁻¹), only Nis + PS + AL705 produced count reductions respect to the control, reaching 3.04 ± 0.35 CFU g⁻¹ counts after 15 days at 15 °C. Ternary combinations containing AL705 showed potential to reduce antimicrobial usages for L. innocua 7 inhibition.     

Effect of light,food additives and heat on the stability of sorghum 3-deoxyanthocyanins in model beverages

This work aimed to evaluate the stability of sorghum 3-deoxyanthocyanins (DXA) in model beverages (pH 3.5) elaborated with crude sorghum phenolic extract, containing ascorbic acid and sulphite, under fluorescent light exposure and subjected to heat treatment. There was no significant difference in the DXA degradation during storage under light exposure (24.16%) and absence of light (20.72%). DXA degradation did not differ in the presence of ascorbic acid during storage under light exposure (23.99–25.38%) and absence of light (19.87–21.74%). The addition of sulphite caused an initial bleaching reaction, but as a reversible reaction, the anthocyanin content was higher on the last day of storage compared to the first day. There were no significant differences in total anthocyanin content of all treatments subjected to the heat treatment (80 °C for 5 and 25 min). Thus, crude DXA are very stable under light, additives and heat, and may be useful as natural food colourants.     

3D printed millireactors for process intensification

The scope of the present research aims at demonstrating the 3D printing use in the manufacturing of microchannels for chemical process applications. A comparison among digital model processing applications for 3D print(slicers) and a print layer thickness analysis were performed. The 3D print fidelity was verified in several devices, including the microchannels' printing with and without micromixer zones. In order to highlight the 3D print potential in Chemical Engineering, the biodiesel synthesis was also carried out in a millireactor manufactured by 3D printing. The millireactor operated under laminar flow regime with a total flow rate of 75.25 ml ? min~(-1)(increment of about 130 times over traditional microdevices used for biodiesel production).The printed millireactor provided a maximum yield of Ethyl Esters of 73.51% at 40 °C, ethanol:oil molar ratio of7 and catalyst concentration of 1.25 wt% and residence time about 10 s. As a result of flow rate increment attained in the millireactor, the number of required units for scaling-up the chemical processes is reduced. Using the approach described in the present research, anyone could produce their own millireactor for chemical process in a simple way with the aid of a 3D printer.     

Structural and thermal behavior of 45S5 Bioglass®-based compositions containing alumina and strontium

The present research exposes the influence of 2 mol% of Al₂O₃ and 2 mol% SrO in 45S5 Bioglass^®-based compositions. Four compositions were produced to elucidate the difference in how both oxides influence structure and thermal behavior separately and their synergy when together. Thermal properties, crystallization tendency, and sintering behavior was evaluated by differential scanning calorimetry, hot stage microscopy, and dilatometry. Changes of medium-range structures were characterized by Qⁿ distribution of Raman spectroscopy and evaluation of ³¹P, ²⁷Al, ²³Na, and ²⁹Si environment obtained by magic angle spinning nuclear magnetic resonance. Despite Qⁿ distribution was predominantly Q² in all samples, the composition criteria used enabled improved processing and stabilibity characteristics. The addition of Al₂O₃ and SrO promoted larger sinterability parameter (S_c) which indicates better sintering behavior, the glass stability against crystallization doubled (K_H) compared to 45S5 and the processing window enlarged from 106 to 171.